911 Carrera Targa F6-3600cc 3.6L SOHC (1996)
Windshield: Technical Service Bulletins
Windshields - New Adhesive When Replacing Front/Rear
Group
6
Model
6 Cyl.
Part Identifier
64..
Number
9511
Subject:
New Adhesive for Front and Rear Windows
ATTENTION: Service Manager / Service Technician
Models Affected:
911 Carrera and Carrera 4 as of Model Year 1995
911 Turbo as of Model Year 1996
General Information:
A new type of adhesive and applicator are to be used whenever replacement of the front or rear windshields becomes necessary.
Parts Information:
Adhesive Set
000 043 203 42
Adhesive Applicator
000 721 958 60 (Special Tool 9586)
Repair Procedure:
As outlined in the workshop manual:
If a removed windshield is not damaged, the sealing surface can be cleaned, and the windshield reinstalled.
The special Tool 9586 has been delivered to all dealerships as a minimum requirement tool.
The former adhesive set, Part Number 999 915 509 40, is still available and should be used when replacing the rear spoiler. Any remaining adhesive can
be used again at a later date by leaving the mixing nozzle, part number 000 043 203 50 on the adhesive cartridge. To use the adhesive again, a new
mixing nozzle is required.