911 Targa 4 (997) F6-3.6L (2010)
/f6-3.6l/Page-81009.png)
13. Position bracket -2- and secure with the fastening screw -1-. Tightening torque: 9.7 Nm (7.5 ftlb.)
14. Tighten fastening nuts -1- close to the plenum panel. Tightening torque: 23 Nm (17 ftlb.)
15. Tighten fastening screw -1- on bracket for heater housing -2-. Tightening torque: 3.5 Nm (2.5 ftlb.)
16. Secure main wire harness using new tie-wraps -1-.
17. Fit ground straps -2- and secure in place with fastening nuts -1-. Tightening torque: 9.7 Nm (7.5 ftlb.)
