911 Targa 4 (997) F6-3.6L (2010)
6. 4. 1 Route the vacuum line set under the heater pipe and behind the cable duct to the change-over valve.
6. 4. 2 Secure the distributing piece -> Figure 20 -17- to the heater pipe with a holder -> Figure 20 -23-.
6. 4. 3 Slide the vacuum line (230 mm) -> Figure 21 -25- into the bent protective tube -> Figure 21 -13- and connect the protective tube to
the side connection on the change-over valve -> Figure 21 -16-.
6. 4. 4 Position the steel flexi-pipes -> Figure 21 -19- in the holder -> Figure 21 -10, 12- and close the holder.
6. 4. 5 Fit the vacuum line into the holder -> Figure 22 -arrows-.
7. Install sports exhaust system.
7.1 Install front muffler.
7. 1. 1 Only for USA set without front muffler:
Install original front muffler with new clamps. -> Workshop Manual '262519 Removing and installing front silencer'