911 Targa 4S (997) F6-3.8L (2007)
/f6-3.8l/Page-392001.png)
Pressure Plate: Service and Repair
Removing and installing clutch
Preliminary work
1. Remove transmission.
Removing clutch
1. Fit toothed segment 9538/1 -1-.
Loosening threaded joint
Information:
To avoid deforming the clutch pressure plate, always loosen fastening screws in at least five steps and in diagonally opposite sequence.
2. Loosen the pressure plate.
3. Remove pressure plate and drive plate.
