911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
Braking Sensor/Switch: Adjustments
Checking Stop Light Switch Adjustment
The stop light must light up after a pedal travel of 6-16 mm (measured to the center of the pedal plate).
If the stop light comes on at a pedal travel of less than 6 mm, turn stop light switch (2) to the right until it is actuated within the tolerance range.
(Take care not to damage the wiring and connector). If the adjustment range of the stop light switch is not sufficient, adjust the brake pedal at the
pivot of brake pushrod 3 (by shortening the pushrod).
If the stop light comes on after a pedal travel of 16 mm, adjust the brake pedal at the pivot of the brake pushrod (by increasing the pushrod length)
until the stop light switch is actuated within the tolerance range.