911 Turbo AWD (996) F6-3.6L Turbo (2001)
1.1. Refer to Removing and installing front seat
1.2. Press the pin into the expanding rivet -D- with a thin screwdriver for example and remove the holder together with the rivet and the control
module.
1.3. Pull control module off the plug -C-.
2. Installing control module for seat heating
2.1. Push control module onto the plug -C-.
2.2. Fix the control module and holder with the expanding rivet -D- and press the pin in the rivet.
Seat heating line route
-
-A- Plug connection for backrest heating element
-
-a- Press plug for backrest heating element together -arrow- and pull from the plug connection -A-.
-
-B- Plug connection for seat heating element
-
-b- Push plug for seat heating element onto -B- until the plug connection engages.
-
-C- Base for seat heating control module.
-
-D- Connection for seat heating wiring harness for the central plug.
-
-E- Power supply, plug for central plug.
Central plug
-
-A- Coding pin: In the Boxster in opening 2, in the 911 Carrera and 911 Turbo in opening 5. Pin BR opening 6, pin RE/VI opening 3.
-
-B- Slide in lock-in position.
1. Removing coding pin and pin