911 Turbo AWD (996) F6-3.6L Turbo (2001)
Water Pump: Service and Repair
Installation
Removing and Installing Coolant Pump (Engine Installed)
1. Clean sealing surfaces.
2. Install a new seal onto the coolant pump.
Tightening torque: 10 Nm (7.5 ftlb.).
3. Install belt guard.
4. Fasten coolant filler hose onto the coolant pump.
5. Remove auxiliary screw again.
6. Fasten engine carrier onto the bracket.
Tightening torque: 65 Nm (48 ftlb.).
7. Fasten engine carrier onto the engine mounts (a/f 18).
Tightening torque: 85 Nm (63 ftlb.).