911 Turbo AWD (996) F6-3.6L Turbo (2001)
Oil Pump: Service and Repair
Oil Container For Exhaust Turbocharger - Engine Installed
Removing And Installing Oil Container For Exhaust Turbocharger - Engine Installed
Removing Oil Container For Exhaust Turbocharger
WARNING:
-
Danger of scalding from draining oil
-
Danger of burns. Parts of the exhaust system can be extremely hot.
-
Do not begin work until the exhaust system has cooled down or wear suitable protective gloves.
-
Danger of fire. The heat shield should not be bent or deformed. Bent or deformed heat shields must be replaced.
Requirement:
-
Remove rear spoiler.
1. Remove heat shield.
2. Unscrew the oil drain plug -arrow- of the oil container and collect any emerging oil.
3. Unscrew the M6 screw on the heat shield -arrow-.