911 Turbo AWD (996) F6-3.6L Turbo (2001)
/f6-3.6l_turbo/Page-606012.png)
Tightening torque of M6 screw = 10 Nm (7.5 ftlb.)
38. Tighten the M6 screw in the holder -3-.
Tightening torque of M6 screw = 10 Nm (7.5 ftlb.)
39. Tighten the hose -arrow- on the left pressure pipe. To do so, push the hose -arrow- on and tighten the screw-type hose clamp.
40. Install the overrun air valve module -Figure-.
41. Connect the connector of the overrun air valve module -arrow- and push on the two vacuum hoses -arrow-.
42. Install fuel filter.
43. Connect the vent line of the coolant expansion tank. Fasten hose clamp.
