911 Turbo AWD (996) F6-3.6L Turbo (2001)
Clockspring Assembly / Spiral Cable: Procedures
Removing
Removing Contact Unit
1. Remove the airbag steering wheel. Refer to "Removing and installing airbag steering wheel".
See: Air Bag/Service and Repair/Procedures
2. Undo and remove the panel.
3. Undo the -fastening screws- of the contact unit.
4. Pull forward and disconnect the electrical plug connections.
5. Remove the contact unit.
NOTE:
-
To prevent unintended rotation of the contact unit (KE) when the steering wheel has been removed, the contact unit locks itself when the steering
wheel is pulled back.
-
Likewise, the contact unit unlocks automatically when the steering wheel is refitted.
Installing
1. Front wheels still unchanged in straight-ahead position.
Installing Contact Unit