911 Turbo AWD (996) F6-3.6L Turbo (2001)
/f6-3.6l_turbo/Page-791001.png)
Seals and Gaskets: Service and Repair
Sealing Ring For Halfshaft Flange
Tools
Item 1
Removing Sealing Ring For Halfshaft Flange
NOTE: Protect drive shafts from damage. (Use dia. 30 mm piece of hose).
1. Uncouple drive shaft on the transmission side.
2. Unscrew fastening screw for the halfshaft flange, unclip the B+ cable on the air flange and pull out the halfshaft flange.
3. Lever out sealing ring using a suitable tool.
Installing Sealing Ring For Halfshaft Flange
