911 Turbo Cabriolet F6-3299cc 3.3L SOHC Turbo (1987)
Pressure Plate: Service and Repair
DISASSEMBLING AND ASSEMBLING
-
Three clips can be used to facilitate installation of clutch pressure plate. These clips are mounted on all spare part clutch pressure plates and must
be removed after installation. It is recommended to keep these clips on hand for later repair jobs.
-
Since the clutch concerned is pulled and the release bearing is designed accordingly. the release bearing must never be subjected to pressure in
direction of drive plate.
-
Never place removed pressure plate on release bearing. When installing or assembling engine and transmission also make sure that release lever is
not exerting force on bearing.