911 Turbo Cabriolet F6-3299cc 3.3L SOHC Turbo (1987)
Differential Case: Service and Repair
Clutch Release Arm/Bearings
Disassembly
-
Remove release lever with spring.See: Clutch/Clutch Linkage/Service and Repair-- Disassembly/Assembly of Clutch Release Spring
-
Drive out bearing bushings with 9167 and mandrel from P 254.
Assembly
1 - Bushing for lever shaft
2 - Bushing for lever shaft
-
Drive in bushings for lever shaft with 9167 and mandrel from P 254 and coat with a grease having a lithium or silicone basis (e.g. Shell Retinax).
-
Install release lever with spring.