911 Turbo Cabriolet F6-3299cc 3.3L SOHC Turbo (1987)
Legend 2
-
Install reverse gear selector rod.
-
Install Special Tool 9106 and assemble reverse gears I and III.
-
Install reverse gear II as shown in illustration.
-
Place in 4th gear and torque nuts to specifications.
^
Torque pinion shaft nut to: 190-200 Nm (140-147 ft lb)
^
Torque drive shaft nut to: 160-180 Nm (118-133 ft lb)
-
Remove reverse gear II again.
