911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
/f6-3.6l_turbo/Page-769001.png)
Antenna Amplifier: Removal and Replacement
Removing and Installing Antenna Amplifier
INFORMATION:
-
The antenna amplifier is installed in connection with the PCM2.
-
The antenna amplifiers are located on the A-pillars.
Removing antenna amplifier
Remove the respective trim of the A-pillar.
1. Disconnect the antenna plugs for the windscreen -1- and -2-.
2. Disconnect the plug connections for the antenna control module -3, 4- left side, -3, 4, 5- right side.
3. Unscrew the two fastening screws -6-.
Installing antenna amplifier
