911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
2.2.4 Switch on PCM2 again if necessary (--> Figure 1 -1-).
2.2.5 Press the EJECT button (--> Figure 1 -5-) to remove the update CD from the CD slot (--> Figure 1 -6-).
3. Install new navigation data.
3.1 Insert the relevant navigation CD (depending on the country) with MY '08 data version into the CD slot (--> Figure 1 -6-).
3.2 Press the NAVI button (--> Figure 1 -8-) and confirm the navigation system warning message by pressing the ROTARY KNOB (--> Figure 1
-7-).
3.3 The message "Updating navigation software" appears in the PCM display.
Select "Yes" in the PCM display by turning the ROTARY KNOB ( --> Figure 1 -7-) and then press the ROTARY KNOB ( --> Figure 1 -7-)
to confirm your selection.
3.4 A brief message appears in the PCM display instructing you not to switch off PCM2 during the loading operation.
Information:
There is no feed back in the PCM2 display when the software has finished loading.
A horizontal progress bar shows the progress of the loading operation.
4. Perform a PCM function test.
Working Times
Disclaimer