911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
The following data are displayed:
-
CRIN (Car Radio Identification Number)
-
VIN (Vehicle Identification Number)
-
Part number
-
System Supplier ECU Hardware No. (cw, year)
-
System Supplier ECU Hardware Version Number
-
System Supplier ECU Software Number (cw, year)
-
System Supplier ECU Software Version Number
-
Porsche workshop number
-
Diagnosis software number
-
Date of ECU Manufacturing (YYYY;MM;DD).
Actual values
It is possible to read out the unlock counter under the Actual values menu item.
Menu item
-
Unlock counter
Function
Under this menu item, it is possible to check the electrical and optical MOST during troubleshooting.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition
-
Select 911 Turbo (996) in the Vehicle type menu and confirm with the ->| key
-
Select PCM in the Control units selection menu and confirm with the >> key
-
Select CDR23 in the 911 Turbo (996) CDR23 function selection menu and confirm with the >> key.
-
Select Actual values in the CDR23 function selection menu and confirm with the >> key.
-
Select Unlock counter in the CDR23 actual values menu and confirm with the >> key.
-
Read out displayed values.
Menu item
-
Transmission errors
Function
Using this menu item, the transmission errors can be read out.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 Turbo (996) in the Vehicle type menu and confirm with the ->| key
-
Select PCM in the Control units selection menu and confirm with the >> key
-
Select CDR23 in the 911 Turbo (996) CDR23 function selection menu and confirm with the >> key.
-
Select Actual values in the CDR23 function selection menu and confirm with the >> key.
-
Select Transmission errors in the CDR23 actual values menu and confirm with the >> key
-
Read out displayed values.
Menu item
-
Traffic broadcast loudspeaker boost
Function
Using this menu item, you can read out the coded traffic broadcast loudspeaker boost.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 Turbo (996) in the Vehicle type menu and confirm with the ->| key
-
Select PCM in the Control units selection menu and confirm with the >> key
-
Select CDR23 in the 911 Turbo (996) CDR23 function selection menu and confirm with the >> key.
-
Select Actual values in the CDR23 function selection menu and confirm with the >> key.
-
Select Traffic broadcast loudspeaker boost in the CDR23 actual values menu and confirm with the >> key
-
Read out displayed values.
Menu item
-
Supply voltage
Function
You can read out the supply voltage of the CDR23 using this menu item.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.