911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
6. Remove the left front seat.
7. If a control module with parking assistant is installed, remove the bracket. To do so, unscrew the two fastening screws -arrow- and disconnect both
plugs.
8. Remove the alarm system control module.
9. Disconnect the plug of the alarm control module, open the plug -A- and pull out the pin strip -B-.
10. Remove pins 38 and 11 with the press-out tool 90207, insulate the lead and tie it to the wiring harness.
11. Push the pin of the grey lead from the service set into the plug for pin 38 until it engages and push the pin of the grey/black lead into the plug for
pin 11 until it, too, engages.
12. Push the pin strip -B- into the plug sleeve -A- and lock the plug.