911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
1. Removing tension strap at the main bow
a. Unscrew Torx screws T 10 -1- from the fabric pocket on the main bow.
b. Move fabric pocket and disengage the tension spring from the tension strap -arrow A-.
2. Removing tension bow seal
Unscrew T25 -2- Torx screws on left and right sides from the tension bow seal and pull out of the groove of the tension bow.
3. Removing convertible-top covering at the tension bow
a. Remove seal from the groove of the tension bow in -direction of arrow A-.
b. Detach convertible-top covering from the groove in -direction of arrow B-.
4. Removing tension cable on convertible-top covering
Unscrew the Torx screw T25 -4- from the tension cable eyelet -3-.