911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
Convertible Top Deck Lid Position Switch / Sensor: Service and Repair
Removing and Installing Microswitch For Convertible-Top Compartment Lid
Removing And Installing Microswitch For Convertible-top Compartment Lid
Removing microswitch for convertible-top compartment lid
1. Move convertible top to service position.
2. Remove cover over the engine To loosen the carpet, pull out the plastic clips with the special tool 21 and fold back the carpet over the
microswitch.
3. Removing microswitches
Disconnect electrical plug connection -4-. Press locking tab and push the plug connection down and out.
Undo fastening screw -1- and lift the retaining bracket -2- with microswitch up and out.
Remove both tab washers -3- and take out the microswitch.