911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
Spoiler: All Technical Service Bulletins
Body - Rear Spoiler Malfunctions
911 Turbo (996)
3/05
ENU
6672
Date: Dec 15, 2005
Malfunctions In The Rear Spoiler Drive
Vehicle Type:
911 Turbo (996)/911 Turbo S (996)
Model Year:
As of 2001
This Relates To:
Rear spoiler drive.
Situation:
Malfunctions in the rear spoiler drive.
Below you will find information on causes and remedial actions for the following malfunctions in the rear spoiler drive.
^
Warning message "Failure of spoiler control" in the display panel of the on-board computer/fault code 9150 in the instrument cluster fault memory
--> see Step 1.
^
Rear spoiler will not extend --> see Step 2.
^
Rear spoiler only extends on one side --> see Step 3.
^
Rear spoiler extends or retracts unevenly --> see Step 4.
Work Procedure:
Complaint
1
Warning message "Failure of spoiler control" in the display panel of the on-board computer/fault code 9150 - "Rear wing control" in the
instrument cluster fault memory.
The warning message "Failure of spoiler control" appears if the rear spoiler
-
does not extend at a speed of > 75 mph (120 km/h)
-
does not retract at a speed of < 38 mph (60 km/h)
-
does not reach its end position
Remedial action
1.1
Switch on ignition.
1.2
Extend the rear spoiler manually. To do this, press the rocker switch in the dashboard trim panel, see Owner's Manual, chapter entitled "Controls,
Safety, Instruments - Extending rear spoiler". Get a second person to observe the extending action of the rear spoiler.
--> Rear spoiler extends normally, continue with Step 1.3.
--> Rear spoiler will not extend, continue with Step 2.3.
--> Rear spoiler only extends on one side, continue with Step 3.3.
--
Rear spoiler extends or retracts unevenly, continue with Step 4.
1.3
Retract the rear spoiler manually. To do this, press and hold down the rocker switch in the dashboard trim panel until the rear spoiler retracts fully.
Observe the rear spoiler as it retracts.