911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
3. Take the lead out of the holders -arrows-.
4. Open the clips -arrow A-.
5. Remove the fabric tape -B- and take out the lead -arrow C-.
Information:
^
When cutting off the ABS lead, make sure that the length of lead in the interior is sufficient for attaching the new lead.
6. Cut the lead in area -D- and remove it.
7. Cut through the fabric tape in the radiator tank, in the area -a-, and expose the remaining ABS lead.
Installing front ABS lead
1. Position the socket in installation position -arrow A- and secure with fastening nut -1-.
2. Insert both plugs -arrow B-.
3. Fold back lead lock -arrow C- until it can be felt to engage on the plugs.
4. Press the lead into the holders by pressing on the rubber sleeves -arrow-.
5. Secure lead for headlight beam adjustment to the ABS lead using fabric tape -A-.
6. Position the lead in installation position and close the clips -arrows B-.