911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
3. Release lead lock -arrow A- and pull off both plugs -arrow B-.
4. Unscrew fastening nut -1- and remove the plug -arrow C-.
5. Take the lead out of the holders -arrows-.
Information:
^
When cutting off the ABS lead, make sure that the length of lead in the interior is sufficient for attaching the new lead.
6. Cut off the lead in area -a- and press inwards using the rubber sleeve -b- ( -arrow- ).
Information:
^
Only for vehicles with headlight beam adjustment (HBA)
7. Cut through the rubber sleeve at the side of the HBA lead -a- and remove the HBA lead -arrow-.
Installing rear ABS lead
1. Position the socket in installation position -arrow A- and secure with fastening nut -1-.
2. Insert both plugs -arrow B-.
3. Fold back lead lock -arrow C- until it can be felt to engage on the plugs.