porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Application and ID|Page 2151 > < Application and ID|Page 2149
Page 3
background image

Information: 
^

The adapter plug is necessary because the plug and the connector assignment have changed as well!

Removal

Caution: 
Danger of damage!
^

The negative terminal of the battery must be disconnected before the airbag control unit is removed!

^

Never disconnect battery with engine running!

^

Never start engine without securely connected battery!

^

Never use a boost charger to start the engine!

^

Never pull off or push on the wiring harness plugs of the control modules or other electronic components when the ignition is switched
on!

1. Move the front seats into the rear seat position.
2. Disconnect the ground wire of the battery and cover the terminal or battery.
3. Remove side-panel lining in front of the center console on the left -A- and right.

Application and ID|Page 2151 > < Application and ID|Page 2149