911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
Tightening torque of the M6 hexagon nut: 10 Nm (7.5 ftlb.)
3. On Tiptronic vehicles, engage (fasten) the keylock cable on the selector lever. To do this, engage the cable nipple -1- on the keylock lever -2-.
Press housing for adjuster -3- into the support bracket until the retaining clip -4- engages.
Information:
^
The new rate-of-turn sensor has a different plug and a different connector assignment. For this reason, it is necessary to fit an adapter plug (adapter
lead with plugs) between the new rate-of-turn sensor and the existing plug!
4. Install the adapter plug (adapter lead with plugs) and the rate-of-turn sensor. To do this:
-
Connect the plug on the adapter lead -X- to the existing plug -6-. Then secure this plug connection firmly to the red lead -A- with a tie-wrap -B- so
that it can not slip.
-
Fit rate-of-turn sensor (new/current version) -3- part no. 999.606.145.00. First, feed (route) the adapter lead -X- under the rate-of-turn sensor -3-.
Then connect the plug -arrow- on the adapter lead -X- to the rate-of-turn sensor -3-.
Information:
^
There is no bow over the new rate-of-turn sensor!