911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
/f6-3.6l_turbo/Page-231007.png)
Position of the snap ring
8. Prepare the cylinders, outer bushings and piston for installation.
-
Insert new O-rings into the cylinders. Grease O-ring areas liberally.
-
Mount new O-rings onto the bushings. Grease O-ring area liberally.
-
Mount outer bushings in the cylinders. Align the bushings in the cylinder. The flattened areas must face towards the other bushings in
longitudinal direction.
-
The recesses on the bushing must align with the bores of the studs.
