911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
-
Mount the outer bushings with pushing device special tool 9660.
View of the mounting tool
-
The outer bushings can also be pushed in with an hydraulic press if necessary.
-
Oil piston shank. Mount commercially available piston restraining strap. Push piston into the bushing. Push the piston restraining strap
downwards at the same time during this procedure.
-
Check the position of the pistons. The large inlet valve recesses on the cylinders must face upwards. If necessary turn the pistons in the
bushing. Pull the pistons far enough out so that the piston pins can just be inserted.