911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
28. Loosen and remove belt guard on the coolant pump.
29. Loosen hose clamp and pull coolant filler hose off the coolant pump.
30. Undo fastening screws of the coolant pump.
31. Remove coolant pump and dispose of seal.
Installation
1. Clean sealing surfaces.
2. Install a new seal onto the coolant pump.
Tightening torque: 10 Nm (7.5 ft. lbs.).
3. Install belt guard.
4. Fasten coolant filler hose onto the coolant pump.
5. Remove auxiliary screw again.
6. Fasten engine carrier onto the bracket.
Tightening torque: 65 Nm (48 ft. lbs.).
7. Fasten engine carrier onto the engine mounts (a/f 18).
Tightening torque: 85 Nm (63 ft. lbs.).