porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Exhaust System|Service and Repair|Page 1212 > < Catalytic Converter|Description and Operation|Page 1208
Page 1
background image

Muffler: Service and Repair

Removing And Installing Rear Mufflers

Removing rear mufflers

Preliminary work: Remove rear spoiler, rear bumper and centre heat shield.

1. Unscrew rear muffler from the turbocharger. Unscrew the -four fastening nuts- on the left and right for this purpose.

2. Disconnect oxygen sensors. Disconnect and disengage the four plugs at the rear of the closing panel for this purpose.

3. Detach restraining straps. Undo the two restraining straps on the rear muffler. Unscrew the two -hexagon socket screws- for this purpose.

CAUTION:
-

Falling rear muffler.

-

The rear muffler is loose after the restraining straps are removed. A second person should hold it up.

4. Push restraining straps out of the holder. Press the restraining strap into the recesses on the engine carrier using a screwdriver and move

outwards.-View from engine side-

5. Remove rear muffler. Two persons can now remove the rear muffler.

Exhaust System|Service and Repair|Page 1212 > < Catalytic Converter|Description and Operation|Page 1208