911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
1. Unscrew drive motor with bracket from the heating/air-conditioning unit -(2 screws)-.
2. Swivel drive motor to the side and disengage the deflection lever.
3. Disconnect electrical plug connection and detach bracket from the drive motor.
Removing drive motor for fresh-air/recirculation valve
1. In order to block the fresh-air supply, the Recirculation button must be pressed before removal. The drive motor can be removed from the installed
heating/air-conditioning unit in this position (recirculation).
2. Remove footwell bulkhead and right air guide.
3. Disconnect electrical plug connection of the drive motor and undo fastening screw.