911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
Condenser Fan: Procedures
Removing And Installing Fan For Condenser
Removing fan for condenser
1. Remove front wheel, front wheel housing liner and front spoiler.
2. Detach cooler bracket from the body -(1 nut, 2 M8 screws and 1 sheetmetal screw)-.
3. Undo -retaining clips- from the radiator and pull off the radiator bracket downwards.
4. Disconnect the electrical plug connection and undo 2 sheetmetal screws from the fan housing.
5. Pull the fan housing with fan motor out of the holder.