porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Instrument Cluster (K20)|Page 4377 > < Diagram Information and Instructions|Page 4374
Page 1
background image

Instrument Cluster / Carrier: Service Precautions
Instrument Cluster (K20)

Introduction

The manual contains the diagnosis for the following system:
Instrument cluster system K20

General instructions / safety instructions

The following points must be observed during vehicle diagnosis:

-

After the battery is connected, volatile memories must be reprogrammed. In the case of radio coding and tuning, the customer must be informed of
decoding and the deleted tuner memory.

-

After troubleshooting or repairs, erase the fault memory with the Porsche System Tester 2 and carry out a test drive.

-

After the test drive, read out the fault memory with Porsche System Tester 2 again.

DANGER:

-

Danger of injury through triggering of driver's airbag

-

Never hang PST 2 over the steering wheel.

CAUTION:  Danger of damage due to improper handling of the battery and the control module connectors.

-

Never disconnect battery with engine running.

-

Never start engine without securely connected battery.

-

Never pull off or push on plug connections of the control modules or other electronic components when the ignition is switched on.

Instrument Cluster (K20)|Page 4377 > < Diagram Information and Instructions|Page 4374