911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
-
Vehicle Ident. No.
NOTE:
-
The country coding is not read out and transferred via this function.
-
Correct country coding is a prerequisite of the correct functioning of the instrument cluster.
Instrument Cluster (W/PSM)
Coding
The following coding options are available under the menu item "Coding":
Menu item
-
Country coding
Function
Selection for following country codings:
USA, RoW, UK, Canada, Saudi Arabia and Japan.
-
Connect the Porsche System Tester II 9588, switch on the ignition and start the automatic control module search.
-
Select vehicle type 911 (996) and control module instrument cluster.
-
Select menu item "Coding".
-
Select menu item Country coding.
-
Select the respective country and code with F8 key.
Menu item
-
PSM
Function
It is possible to code the instrument cluster under this menu item after replacing the instrument cluster.
-
Connect the Porsche System Tester II 9588, switch on the ignition and start the automatic control module search.
-
Select vehicle type 911 (996) and control module instrument cluster.
-
Select menu item PSM.
-
Select the respective menu item with/without PSM and code with F8 key.
Menu item
-
Air conditioning
Function
This menu item enables the instrument cluster to be coded after replacing the instrument cluster or after retrofitting air conditioning.
-
Connect the Porsche System Tester II 9588.
-
Switch on ignition and start the automatic control module search.
-
Select vehicle type 911 (996) and control module instrument cluster.
-
Select menu item Air conditioning.
-
Select the respective menu item with/without air conditioning and code with F8 key.
Menu item
-
Cruise control
Function
This menu item enables the instrument cluster to be coded after replacing the instrument cluster or after retrofitting a cruise-control actuator.
-
Connect the Porsche System Tester II 9588, switch on the ignition and start the automatic control module search.
-
Select vehicle type 911 (996) and control module instrument cluster.
-
Select menu item "Coding".
-
Select menu item Cruise-control actuator.
-
Select the respective menu item with/without cruise-control actuator and code with F8 key.
Menu item
-
On-board computer
Function