911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
5. Tilt air cleaner housing outwards. To do this, tilt the housing upwards and to the right by 90 degrees and then turn the housing to the left by
approx. 90 degrees.
6. Unclip the hot film mass air flow meter cable. Open the omega clip on the left side of the air cleaner housing and take out the cable. Take the air
cleaner housing out of the engine compartment.
7. Open air cleaner housing. To do this, open the new captive screws and pull the two housing halves apart.
8. Take out the cleaner element. Take out the air cleaner element. Wipe out the two housing halves with a cloth.
Installing air cleaner
1. Insert filter element. Insert the filter element into the cleaned air cleaner housing. Retighten the two air cleaner housing halves with the new captive
screws.
2. Clip in hot film mass air flow sensor cable. To do this, insert the cable into the omega clip on the left air cleaner housing side and then close the