911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
1. Push the optical contacts -B- and -A- into the module until they engage perceptibly. Check for proper seating of the optical contacts.
2. Connect the module to the connector on the bushing side.
3. Push the spring cap on to the connector until it engages perceptibly -arrow-.
Optical waveguide modules
At least one transmitter diode and one receiver diode is installed in all MOST control modules. A transmitter diode of an MOST device is connected to
the respective receiver diode of a second MOST device. A circuit is created, in which the light signal in every control module is refreshed (the light
signal is converted to an electrical signal in every control module).
The graphic below shows the wiring of the individual MOST control modules which varies according to the particular equipment.