911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
Variable Valve Timing Solenoid: Service and Repair
Removing and installing hydraulic valve
Removing the hydraulic valve
Preliminary work: The rear spoiler and the heat shields must be removed.
1. Remove the side heat shields on the relevant side of the vehicle.
2. Disconnect the connecting hose between the air cleaner and the charge air cooler. To do so, lever out the retaining clip on the top of the charge air
cooler and pull the hose out.
3. Pull the lower connecting hose off the charge air cooler. To do so, lever the retaining clip out and pull the hose downwards.
4. Undo the front fastening. Unscrew the fastening nut and the two fastening screws.