911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
Air Filter Element: Service and Repair
Removing And Installing Air Cleaner
Removing air cleaner
1. Disconnect plug on the hot film mass air flow meter. To do this, push the plug downwards and press the grooved surface at the sides. Pull the plug
up and off at the same time.
2. Pull off the connecting hose between the left turbocharger and the intake pipe. To do this, unclip the retaining clips using a screwdriver and pull
out the hose. Refit the retaining clips immediately.
3. Unscrew the fastening screw M6 x 34 at the rear of the air cleaner housing.
4. Undo hose clamp. Undo the hose clamp -arrow- between the air cleaner housing and the intake pipe.