911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
5. Unclip intake pipe. Unclip the pipe at the bottom and lift out.
6. Unscrew the four fastening nuts.
7. Pull air guide at the back end downwards and then take out of the body towards the rear.
Installing air guide for charge air cooling
1. Reinstall air guide. Replace all seals on the air guide. Insert the front end of the air guide into the body. Press the back end upwards into the wing.
2. Retighten air guide. Replace the four fastening clips of the intake pipe and tighten the air duct with the -four fastening screws-.
3. Reinstall intake pipe -(catches)-. First insert the pipe into the duct and then press evenly into the body.