911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
5. Unscrew both fastening screws (hexagon socket a/f 6) -arrows-.
6. Remove oil container.
NOTE: Always replace the oil sealing ring -arrow- and the sealing ring for the oil drain plug:
Installing oil container for exhaust turbocharger
1. Place the lower union nut of the oil line -lower arrow- in position on the oil container.
2. Fasten the oil container using the two hexagon socket head bolts (a/f 6) -arrows-.
Tightening torque: 23 Nm (17 ftlb.)
3. Place the upper oil line in position and tighten both union nuts.
Tightening torque 30 Nm (22 ftlb.)