911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
4. Tighten the M6 screw -arrow- of the line holder.
Tightening torque 10 Nm (7.5 ftlb.)
5. Fit the heat shield using the M6 screw -arrow-.
Tightening torque 10 Nm (7.5 ftlb.)
6. Insert the drain plug -arrow- and the sealing ring.
Tightening torque 30 Nm (22 ftlb.)
7. Installing heat shield.
8. Check oil level and top up if necessary.