911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
New/current version: Rate-of-turn sensor with part No. 996.606.145.00.
Introduced in production shortly prior to the end of model year 2000. The new/current rate-of-turn sensor can be retrofitted. The following instructions
describe the conversion.
Overview of rate-of-turn sensor conversion
In case of first-time installation of the new/current rate-of-turn sensor, the front center console support -1- and the holder -2- must be replaced. The
following parts are omitted: The bow -4- over the rate-of-turn sensor -3- and the cable guide -5-. The adapter plug -X- must be installed between the
plug -6- and the rate-of-turn sensor -3-.
1 - Front center console support
2 - Holder
3 - Rate-of-turn sensor
4 - Bow over rate-of-turn sensor
5 - Cable guide
6 - Plug (Item X = adapter plug that is installed between the new rate-of-turn sensor and the existing plug).
The table below for the 911 Turbo (996) provides an overview of the part allocation for replacement of a rate-of-turn sensor 996.606.147.00 (first
version).