911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
4. Remove center console front part -B-. Then remove center console -C-.
5. Remove cable guide for the rate-of-turn sensor and remove the front center console support -arrows-.
6. On Tiptronic vehicles, disengage (loosen) the keylock cable -5- on the selector lever: To do this
-
Press the retaining clip -4- together and carefully pull the adjuster -3- upward out of the support bracket.
-
Disengage cable nipple -1- on the keylock lever -2-.
7. Unlock plug of the rate-of-turn sensor with the ignition switched off -arrow on the plug- and pull it off. Undo fastening nuts -arrows- and remove
the rate-of-turn sensor with bow.
Information:
^
Pull at the plug housing only! Never pull the electrical connections!