porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Relay For Main Switch - GT2, - As of My 2001|Page 2350 > < Removing and Installing Relay For Main Switch - GT2, - As of My 2001|Page 2348
Page 2
background image

The limit position of the respective power window is now stored in the control module again.

90 25 Instrument cluster

The trip counter is set to 0 when the power supply is disconnected.

9030 Clock

INFORMATION:  In the case of vehicles with PCM, the date and time are deleted when the battery is disconnected.

Problem

Remedy

The time is deleted when the power

Enter the current time again.

supply is disconnected.

9023 Fuel level display

Problem

Remedy

- If the power supply is

Fill the tank; then the fuel level 

interrupted by a discharged or

sensor is in operating range and

disconnected battery with the

its display precision is guaranteed.

tank containing less than 19 l,
the calculated value for the
range on remaining fuel in the
instrument cluster will be
incorrect or deleted.

- If the tank contains less

than 19 l, it is possible that the
fuel level warning light is no longer
activated.

- If the power supply is restored

with the fuel level at less than 19 l,
it is possible that the fuel level
display may subsequently display an
incorrect value.

This may lead to the vehicle breaking down.

9120 Radio

Problem

Remedy

The radio reverts to the Code

Input the radio code.

function when the battery is
disconnected and is thus no

If the code card is unavailable, the

longer ready for operation.

radio code can also be read from the DME control module (under "Vehicle data").

It is also possible to gain this code from the Porsche IPAS.

9110 PCM

Problem

Remedy

- The PCM reverts to the

Input the PCM code. If the code card is

Code input function when the

unavailable, the PCM code can also be

battery is disconnected and is

read from the DME control module (under

thus no longer ready for operation.

"Vehicle data").

- When the power supply is

It is also possible to gain this code from

disconnected, the built-in GPS

the Porsche IPAS.

receiver loses the so-called
almanac containing the satellite
orbital paths.

- The date and time are

Switch on the PCM with a free panoramic

deleted when the battery is

view for approx. 20 minutes (to load

Removing and Installing Relay For Main Switch - GT2, - As of My 2001|Page 2350 > < Removing and Installing Relay For Main Switch - GT2, - As of My 2001|Page 2348