911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
1. Fit drive plate with centering mandrel, special tool centering mandrel 9102 in the guide bearing (needle bush).
2. Fit thrust plate. To do so, position the special tool toothed segment P201b -A- on the stud and tighten the pan-head screws in several stages and in
diametrically opposite sequence.
Tightening torque: 23 Nm (17 ft. lbs.)
3. Remove the special tool centering mandrel 9102.
4. Remove the special tool toothed segment P201b.
5. Refit transmission.