911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
4. Mount the tie rod end on the wheel carrier.
5. Insert the fastening screw of the lower spring strut -arrow-.
1. Screw on the stabilizer mount -arrow-. Counter with an open-ended wrench when doing this.
2. Screw on the lower linkage for the headlight height adjustment -arrow- (counter with open-ended wrench). Only on left side!
3. Mount the drive shaft on the transmission flange.
4. Remove the drive shaft protection -arrow-.
5. Tighten axle nut -arrow-. Fasten the wheel.