911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
Removing Differential and Differential Lock
Removing differential and differential lock
1. Remove transmission.
2. Fasten the transmission on assembly support.
3. Pull out hexagon-head bolts (no. 1 in overview) and halfshaft flange (no. 2 in overview).
4. Unscrew hexagon-head bolts (no. 3 in overview) and disassemble cover for final drive (no. 4 in overview), possibly with a rubber hammer.
5. Remove differential.
Installing Differential and Differential Lock
Installing differential and differential lock
1. Insert differential.
2. Insert cover with new, lightly oiled O-ring (no. 5 in overview) and screw in hexagon head bolts.
Tightening torque: 25 Nm (18.5 ft. lbs.)
3. Push in halfshaft flange and screw in hexagon-head bolts.
Tightening torque: 44 Nm (32.5 ft. lbs.)
4. Refitting transmission.