911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
3. Unscrew two hexagon-head bolts -A- and remove the transverse strut.
4. Disconnect the plug -B- and remove the electrical cable from the working area.
5. Disengage the coolant line for the heating supply and return lines from the plastic clips -A- and pull the line over the holders of the underbody trim
-B- towards the rear.
6. Seal the coolant line by clamping it with special tool hose clamp VW3093 -A-.
7. Unscrew the transmission oil connecting line -A- between the oil cooler and the transmission on the transmission oil cooler.
8. Seal the coolant line by clamping it with special tool hose clamp VW3093 -B-.
9. Place a suitable container under the vehicle to collect the coolant-oil mixture from the transmission oil cooler.
Warning:
Coolant and transmission oil may emerge during the repair operations described below. With the engine at operating temperature, there
is a risk of scalding due to these liquids.
10. Undo the spring band clamp -A- and pull off the coolant hose.