911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
INFORMATION:
-
To fit the lock actuation correctly, the securing spring must be hooked into the lock actuation lever before the door lock is installed.
-
The secured position of the lock actuation is released automatically when the door handle is first pressed. A clear clicking sound can be heard
when the door handle is first pressed.
-
Pull carefully on the lock actuation to check that it is secured in installation position. Repeat the steps listed above if necessary.
1. Guide the assembly tool T10118 -1- between the securing spring -2- and the lever -3-.
2. The securing spring -2- hooks on to the tool with a rotary movement.
3. Pull the securing spring -2- towards the outside of the door (-arrow A-) until the spring engages audibly in the locking lug -1- of the lever -3-.
4. Unhook the tool -1- and remove it.
Installing door lock