911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Steering-wheel holder
5.1.
Steering wheel must be in center position.
Universal joint for steering gear
5.2.
Fit universal joint on the steering spindle.
Fit universal joint on the steering spindle while paying attention to the installation position -see arrows-.
5.3.
Screw in and tighten M8 screw -arrow- on the universal joint.
-
Tightening torque: 23 Nm (17 ftlb.)
Universal joint
6. For all-wheel drive vehicles: Fit the drive shafts on the transmission side.