911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
2. Mixing the Wash Shampoo from the Cabriolet Tequipment care case: 1/2 large cap (measuring cap) -A- to 2 litres of water (i.e. 1 1/2 caps to 5
litres)
3. Use a brush with strong, non-scratch bristles. Rub the water/shampoo mixture into the hood fabric in circular movements while pressing slightly on
the brush until a film of foam forms.
4. Maintain a minimum distance of 300 mm between the power washer spray jet and the hood. Do not direct the high-pressure blast directly onto the
seals.
Do not let the Wash Shampoo dry in. Rinse the foam thoroughly off the hood, starting at the cowl panel frame and moving towards the hood
compartment lid.